HDPE (Polyethylene)
The most popular and least expensive choice, compatible with a broad range of chemicals. Common for DEF, ethylene glycol, bleach, acids and caustics.
HDPE double wall tanksTank-within-a-tank containment
Double wall tanks in HDPE, polypropylene and PVDF (Kynar). If the inner tank ever leaks, the outer tank holds the chemical, so you get secondary containment without a separate dike or basin.

Answer a few questions and the Tank Wizard picks the right double wall tank for your chemical and your site: resin and SG rating, fittings and gaskets from our compatibility chart, freeze protection from your ZIP code’s record low, and wind and seismic tie-downs. Then send it to us for a quote.
Step 1 · Pick your resin
Most double wall tanks of 5,000 gallons or less are available in all three. Choose by temperature and chemical compatibility.
The most popular and least expensive choice, compatible with a broad range of chemicals. Common for DEF, ethylene glycol, bleach, acids and caustics.
HDPE double wall tanksThe next step up for heat. A strong choice for hot sodium hydroxide and chemicals that don't suit polyethylene.
Polypropylene double wall tanksThe highest temperature and chemical resistance we offer, using Kynar® by Arkema. Chosen when HDPE and polypropylene can't do the job.
PVDF double wall tanksNot sure which resin fits your chemical? Check chemical compatibility
Most ordered
The tanks our customers ordered most over the last 12 months. Click any tank for sizes, drawings and a quote.
Why double wall
Bailiff makes and sells large double wall plastic tanks for chemical storage, fitted the way your system needs them.
The outer tank catches anything the inner tank lets go, so you may not need a separate dike or containment basin.
The inner and outer tanks are rotationally molded by Bailiff or a trusted molding partner, then welded, assembled and fitted at our Willis, Texas plant.
Flanged, threaded or sanitary tri-clamp fittings, installed in our shop at the locations you specify.
Built at our Willis, Texas plant by a family-owned company that has outfitted tanks since 1981 and molded them since 2000.
The federal Spill Prevention, Control, and Countermeasure (SPCC) rule generally applies to a facility with more than 1,320 gallons of aboveground oil storage, counting containers of 55 gallons or more, and it calls for secondary containment. Oils include fuel, synthetic and mineral oils. (U.S. EPA)
Federal hazardous waste tank rules list a double-walled tank as one accepted form of secondary containment, along with an external liner or a vault, and they call for leak detection between the walls. (40 CFR 265.193)
Acids, caustics and oxidizers are usually covered by state rules, local fire codes and your facility’s permits. Many accept a closed double wall tank as secondary containment. Check with your regulator or fire marshal before you buy.
An interstitial leak detector watches the space between the walls and warns you if the inner tank leaks.
This is a general summary, not legal advice. Rules depend on what you store, how much and where.
Go deeper: Federal secondary containment rules (sizing, freeboard, the 25-year storm, concrete dikes) and oilfield tank containment and BLM rules, with government sources. Size a dike for your address with the containment calculator.
Solutions by industry
The chemicals, resins and options each industry uses most, in one place.
Containment for caustic, hypochlorite, acids and coagulants at treatment plants.
See tanks for this industryBulk storage for distributors handling acids, caustics and oxidizers.
See tanks for this industryContainment for liquid fertilizers, acids and crop chemicals.
See tanks for this industryContainment on location for acids, brines and treating chemicals.
See tanks for this industryContainment for acids and process chemicals feeding production lines.
See tanks for this industryStorage applications
Double wall tanks for acids, caustics, oxidizers and fluids that call for extra protection.
Fittings & options
Top fill lines with check valves, vents, insulation, heat tracing, wind and seismic restraints and lifting lugs, installed and tested before your tank ships.
Shop by size
Every double wall tank in each size, from 500 to 10,000 gallons, with dimensions and prices.
Questions
A double wall tank is a tank inside a tank. The inner (primary) tank holds the chemical, and the outer tank surrounds it with a space between the walls. If the inner tank ever leaks, the outer tank catches the liquid and keeps it off the ground. An interstitial leak detector can watch the space between the walls, and fittings that pass through both walls are built for double wall service.
HDPE double wall tanks run from 100 to 10,000 gallons. Most polypropylene and PVDF double wall tanks are 5,000 gallons and smaller. Vertical tanks are rated 1.5, 1.9 or 2.2 SG, depending on the size. See every double wall tank with live dimensions and prices.
If you store an acid, caustic, oxidizer or another hazardous liquid, you probably need some form of secondary containment. Many local, state and federal agencies require it or strongly recommend it. In many jurisdictions a closed double wall tank meets that requirement on its own, but confirm with your local regulator. How secondary containment works.
An open dike or containment basin usually has to hold 110% to 120% of the largest tank, and rain, dirt and leaves eat into that capacity. A double wall tank is sealed, takes less floor space, keeps rain out and keeps fumes from a leak in. A dike can make sense when several tanks share one containment area.
HDPE is the most economical and handles most acids, caustics, bleach, DEF and glycol up to about 120°F. Polypropylene handles hot caustics up to 200°F. PVDF (Kynar®) is for oxidizers, concentrated acids and high-purity service, up to 275°F in some applications. Check your chemical.
Yes. Insulated double wall tanks add spray foam insulation over the outer tank, with heat tracing available, for caustic soda and other liquids that freeze or thicken in cold weather.
Often, yes. Federal hazardous waste tank rules (40 CFR 265.193) list a double-walled tank as an accepted form of secondary containment, with leak detection between the walls. For oil, the EPA SPCC rule generally applies above 1,320 gallons of aboveground storage and requires secondary containment. Chemical storage is usually governed by state and local rules and fire codes, so confirm with your regulator.
A double wall tank is best for a single bulk tank: it is sealed, needs no extra floor space and keeps rain out. A containment basin suits drums, totes and small tanks, or a few containers that can share one basin. We build both.
Under the EPA SPCC rule, containment must hold the entire capacity of the largest tank plus sufficient freeboard for precipitation, and EPA considers a 25-year, 24-hour storm the proper standard for that freeboard (federal containment rules). Our free containment calculator looks up that rainfall for your address from NOAA Atlas 14 and gives the minimum dike wall height. A closed double wall tank keeps rain out of the containment space.
“We had an excellent experience working with this company for our chemical holding tank needs. Their tanks are built with outstanding quality and durability. If you’re looking for reliable, high-quality chemical holding tanks backed by excellent support, I highly recommend this company”
“I recently bought a 5000 HTP chemical holding tank from them and it is spectacular. The best most reliable purchase I have made for my glycol company. The process was completely stress free and they were incredibly helpful.”
“It has been a genuine pleasure working with Bailiff Enterprises. From the start, Wesley and Crystal have been outstanding to work with. Responsive, professional, and truly attentive to our needs as a customer. As our business has grown, they've grown right alongside us, consistently delivering quality products and service we can count on. …”
“Bailiff Enterprises was a pleasure to deal with. I came to Wesley with a rather large project and he fired on all cylinders to meet all expectations and accommodate any customization that the project required. …”
“Bailiff Enterprises has the best polypropylene tanks in the market. One stop shop for all your chemical tank needs.”
“Bailiff has a huge variety of tanks for all purposes ready to go. They are doing rotational molding on a scale that 99% of other companies can't even comprehend. I'm thoroughly impressed with the quality of product they produce. …”
Talk to a tank specialist